Shrink Sleeve
Heat‑shrink joint for the straight field joint between two pre‑insulated pipes. Casing‑grade HDPE PE 100, sealed with butyl mastic; higher‑spec versions add shrink film and foam fill. A non‑welded, leak‑testable joint.
The type-tested constructions
The drawing is Kampek's own. It asserts only what is already published on this site or on the manufacturer's own pages.
- 1Shrink sleeve, casing‑grade HDPE PE 100
- 2Butyl seal at both ends of the sleeve
- 3Foamed in the joint on site
- 4Pre‑fabricated insulation shells instead of foaming
- 5Circumferential electric weld in addition to the butyl seal
Technical data
EN‑489‑1:2019 Certifications →
Other products in this family
Heat‑shrink joint for joining two casing pipes of different diameter.
End sleeve for pipeline terminations and pipe ends.
Cross‑linked polyethylene shrink sleeve insulated with pre‑fabricated shells instead of foaming in the joint.
Thick‑wall PE sleeve for the joints of pre‑insulated district heating pipe, with the welding band built into the sleeve.
Request a quote: Shrink Sleeve
Tell us quantity and schedule; we reply on availability and terms within days.